Blog

loca

26-10-13

Washdown Piezo Switches: Cleaning and Panel Qualification

Evaluate a washdown piezo switch against cleaning methods, chemicals, temperature changes, panel seals and rear enclosure protection before ordering.
26-10-13

Piezo Switch Circuit Design: Output and Controller Input Checks

Check a piezo switch circuit against PLC or microcontroller inputs: output type, pulse timing, leakage, lamp wiring and controlled interface validation.
26-10-12

Waterproof Emergency Stop Buttons: Sealing and Exposure Review

Select waterproof emergency stop buttons by rating scope, panel sealing and real exposure. Verify rear protection, outdoor conditions and operator action.
26-10-12

Emergency Stop Button Symbols: Contacts, Markings and Drawings

Understand emergency stop symbols, NC contacts, release arrows and device references. Match schematic meaning to the exact operator and contact assembly.
26-10-12

Emergency Stop Circuit Diagrams: Dual-Channel NC Review

Review emergency stop circuit diagrams: NC contact states, dual inputs, reset, output feedback and validation. Prepare a complete component enquiry.
26-10-11

Illuminated Selector Switches: Position and Lamp Feedback

Define illuminated selector switch contact states, lamp supply and indication meaning. Distinguish requested mode, accepted mode and actual operation.
26-10-11

Key Switch Removal Positions: Captive and Removable Keys

Specify key removal positions independently from contact states and spring return. Practical ordering and replacement checks for industrial key switches.
26-10-11

12V and 24V Key Switches: Contact Duty and Input Selection

Select 12V and 24V key switches by actual contact duty, PLC input compatibility, load type and lamp supply. A voltage label alone is not enough.
26-10-10

Waterproof Key Switches: Sealing and Environment Checks

Specify waterproof key switches by rating scope, panel sealing and real exposure. Check outdoor conditions, cleaning, condensation and rear-contact protection.
26-10-10

Illuminated Key Switches: Lamp Meaning and Contact Selection

Choose an illuminated key switch by lamp meaning, contact duty, supply and key removal positions. Avoid confusing a selected request with machine operation.
26-10-10

Momentary Key Switches: Choosing the Spring Return Action

Specify a momentary key switch by return direction, contact states, key removal positions and controller response. Practical checks for industrial panels.
26-10-09

Continuous vs Pulsed Buzzers: Choosing an Alarm Pattern

Compare continuous and pulsed buzzer patterns, internal and external timing, acknowledgement behavior and installed alarm recognition.

1 2 3 4...16 Avanti > >>Page 3 / 16