Product Overview
GQ10-KH-11/S is a 10mm metal push button switch for compact panel cutouts. The high-round stainless operator provides 1NO1NC contacts with Momentary or Latching operation for industrial control panels that need a small metal push button without illumination. Certification: CE is listed on the supplier SKU sheet for this model.
Buyers comparing metal push button switch options at φ10mm can shortlist this SKU when front-panel protection of IP40 is acceptable and a pin terminal (1.8×0.4mm) matches the wiring plan. For the illuminated ring version, see GQ10-KH-11E/S.
- Installation diameter: φ10mm
- Head shape: High round
- Contact structure: 1NO1NC
- Operation mode: Momentary/Latching
- Housing material: Stainless steel
Product Views
Specifications
Electrical and mechanical ratings
| Switch rating | Ui:250V、Ith:3A |
|---|---|
| Mechanical life | モーメンタリ ≥ 200,000回、ラッチング ≥ 50,000回 |
| Electrical life | ≥ 50,000サイクル |
| Contact resistance | ≤50mΩ |
| Insulation resistance | ≥100MΩ（500VDC） |
| Dielectric strength | 1,000VAC |
| Operation temperature | -25℃〜55℃（凍結なきこと） |
| Operation pressure | 約1.2N |
| Operation travel | 約2.5 mm |
| Torque | ナットに加わる最大トルクは約0.3Nm |
| Front panel protection degree | IP40 |
| Terminal type | ピン端子 (1.8x0.4mm) |
| Minimum load | 3V AC/DC, 5mA (Reference) |
| Operating humidity | 45~85% RH(Non condensing) |
The GQ10-K catalog also lists Latching mechanical life ≥100,000 cycles for the family drawing block. The SKU page lists Latching ≥ 50,000 cycles—confirm the applicable figure on the RFQ.
Mounting and envelope (catalog)
| Mounting hole | Φ10 +0.2 / -0.0；minimum panel pitch about 15 mm |
|---|---|
| Thread | M10X0.75 |
| Head / button | About Φ12 head；button face about Φ6.5 |
| Body length | About 33 mm overall on the catalog drawing |
| Nut across flats | About 13.9 mm |
| Tail / wiring | Wiring patch (1.8x0.4)mm |
| Protection class | IP40 |
| Housing material | ステンレス鋼 |
MATERIAL
- Contact: Silver alloy
- Button: Stainless steel
- Body: Stainless steel
- Base: PA
Related Models
| Model | Cutout | Contacts | Illumination |
|---|---|---|---|
| GQ10-KH-11/S | 直径10mm | 1a1b | None (this page) |
| GQ10-KH-11E/S | 直径10mm | 1a1b | Ring illuminated；LED R/G/B/Y/W；AC/DC 6V/12V/24V |
Both models share the GQ10-K series mechanical envelope. Choose 11E/S when a ring lamp is required; keep 11/S when you need a metal momentary push button switch without LED wiring.
Design Notes
- Stainless steel button and body support metal-front panel aesthetics in compact φ10mm openings.
- Pin terminal (1.8x0.4mm) suits dense PCB or harness layouts—confirm mating connector before tooling.
- Published front panel protection degree is IP40; do not assume a higher front IP rating for this SKU without a written confirmation.
- Catalog mounting hole is Φ10 with +0.2 / -0.0 tolerance and about 15 mm minimum pitch—verify panel laser/punch drawing before production.
Typical Use
Typical use is compact industrial operator panels and equipment HMI where a 10mm metal push button switch with 1NO1NC logic is enough and the front side remains in an IP40 environment. For wash-down or outdoor fronts, confirm a higher-protection ONPOW series before quoting.
The GQ10-K series hub also positions the family for latching/momentary metal operators with a high flat design for easy triggering. Use that series page for family browsing, then lock the exact SKU (11/S vs 11E/S) on the RFQ.
About ONPOW
ONPOW states it was founded on October 4, 1988, with registered capital of RMB 80.08 million and about 300 employees, and lists management-system certifications ISO9001, ISO14001, and ISO45001. Product-safety marks named on the public site include UL, VDE, CCC, and CE—confirm which mark applies to the exact GQ10-KH-11/S configuration in your RFQ.
Customization
If you have any customization needs, please contact ONPOW. Order quantity, lead time, and trade terms are not published on this page; confirm them in the quotation reply.
The GQ10-K catalog notes that other LED voltage levels can be customized for illuminated variants and may require external resistors—those options apply to illuminated models such as GQ10-KH-11E/S, not to this non-illuminated 11/S SKU.
Resources
- GQ10-K Series overview — family photos, sibling SKUs, and inquiry form
- Download GQ10-K metal push button catalog PDF — model coding, drawings, and ratings
- GQ10-KH-11E/S — ring-illuminated sibling
- Download center — additional site documents
よくある質問
Is GQ10-KH-11/S momentary or latching?
Supplier data lists Operation mode: Momentary/Latching. Specify the required mode and quantity on the RFQ.
Does this SKU include a ring lamp?
No. GQ10-KH-11/S is the non-illuminated model. For ring illumination and LED color/voltage options, use GQ10-KH-11E/S.
What IP rating is published?
Front panel protection degree: IP40. Higher IP claims for other ONPOW families do not automatically apply here—confirm the rating required for your panel front.
Where are the drawings?
Use the outline drawing on this page and the GQ10-K catalog PDF for mounting-hole and envelope dimensions.
Request a Quote
Use 無料見積もりをすぐにご依頼 on this page or email sales@onpow.com. Include model GQ10-KH-11/S, momentary or latching preference, quantity, panel hole drawing, and target cutout.
