ブログ

26-10-17

Push Button Legend Plates: Clear Commands and Durable Marking

Specify push button legend plates with clear command wording, verified mounting, readable layouts, durable marking and controlled artwork.
26-10-17

RJ45 Panel-Mount Connectors: Network and Enclosure Checks

Specify RJ45 panel connectors with channel tests, shielding, PoE requirements, enclosure checks and a clear machine service-network purpose.
26-10-17

USB-C Panel-Mount Connectors: Data, Power and Qualification

Qualify USB-C panel connectors for required data, power, roles, plug orientations and cable paths without assuming capabilities from shape.
26-10-16

Panel-Mount USB Connectors for Machine Service Access

Select panel-mount USB service connectors by host and device roles, cable path, mounting, enclosure conditions and complete task testing.
26-10-16

AC-15 and DC-13: Reading Control Switch Load Ratings

Read AC-15 and DC-13 control-switch ratings with the actual coil load, operational voltage, current, suppression and switching duty.
26-10-16

Gold vs Silver Switch Contacts for Low-Level Signals

Compare gold and silver contact systems by actual signal level, switching duty, surface construction, environment and qualification evidence.
26-10-15

Switch Contact Resistance Measurement: Avoiding False Results

Measure switch contact resistance with defined test boundaries, suitable fixtures, four-wire methods and controlled low-level test conditions.
26-10-15

Push Button Incoming Inspection: A Receiving Checklist

Inspect incoming push buttons using order-code checks, panel fit, contact mapping, lamp tests, traceable samples and clear lot-release records.
26-10-14

Plug-In Relay Sockets: Compatibility, Retention and Replacement

Qualify a plug-in relay socket using approved pairings, terminal drawings, wiring limits, retention accessories and controlled maintenance procedures.
26-10-14

How an Electromechanical Relay Works: Coil, Armature and Contacts

Understand the electromechanical relay working principle: coil, armature, normal contact states and the difference between a button command and coil drive.
26-10-13

Washdown Piezo Switches: Cleaning and Panel Qualification

Evaluate a washdown piezo switch against cleaning methods, chemicals, temperature changes, panel seals and rear enclosure protection before ordering.
26-10-13

Piezo Switch Circuit Design: Output and Controller Input Checks

Check a piezo switch circuit against PLC or microcontroller inputs: output type, pulse timing, leakage, lamp wiring and controlled interface validation.

1 2...15 次へ > >>Page 1 / 15