Key removal positions specify where the key can be withdrawn from an industrial key switch. They are independent of the number of switch positions, the contact arrangement and whether the operator is maintained or spring return. To order correctly, name every mechanical position, state whether withdrawal is permitted there and record the electrical state that remains after removal. Then compare that behavior with the machine’s access and operating procedure. A switch supplied with two keys does not necessarily allow withdrawal in two positions, and removing the key from an ordinary control switch does not establish hazardous-energy isolation.
Start with the behavior after the operator leaves
The useful design question is what should remain possible after an authorized person selects a position and walks away. Should the selected mode remain active? Should the key stay captive while that mode is selected? Should the operator return to a neutral position before the key can be removed? These are distinct requirements.
Consider a maintained mode selector. Permitting key removal in the selected mode can allow the operator to leave the setting in place while retaining the key. That may support an intended access procedure, but it can also leave other workers uncertain about who can change the state. The operating procedure and visible mode information need to address that result.
For a temporary command, withdrawal may be restricted to the rest position. However, do not infer that restriction from the presence of a return spring. Request the exact removal-position specification for the supplied lock and operator.
Number of positions does not define withdrawal permission
A two-position key switch can have different withdrawal arrangements depending on its design and options. A three-position operator can also offer different permitted positions. The position count identifies mechanical selections; it does not establish where the lock releases the key.
Likewise, the number of keys in the package says nothing about the removal pattern. Two keys usually describe the supplied quantity, not two electrical functions or two withdrawal positions. Avoid including that package detail as the main specification.
Use a position diagram and a written table. Define names such as “rest,” “setup” and “automatic” rather than relying only on left and right. Then include the drawing’s rotation convention so that the panel builder and supplier refer to the same viewpoint.
The ONPOW key and selector switch category is the product starting point. Its head styles and series names help identify a device family, but the exact removal pattern requires confirmation for the ordered configuration.

A removal-position specification table
A completed table should describe the intended machine behavior without guessing at a supplier’s lock option. The example below lists the information needed for each position rather than prescribing a universal arrangement.
| Field for every position | 기록할 내용 | What it prevents |
|---|---|---|
| Position identity | Named state and matching rotation diagram | Ambiguous references to left, right or position two |
| Mechanical action | Maintained or return direction | Assuming withdrawal and spring return are the same feature |
| Key removal permission | Permitted or captive, confirmed for the exact version | Ordering from position count alone |
| Contact state | State of each labeled contact at that position | Leaving an unspecified electrical state after removal |
| 컨트롤러 해석 | Requested mode, accepted mode or temporary command | Confusing the key’s mechanical state with actual machine operation |
| Indication after removal | How other workers identify the current state | A selected mode becoming invisible when the keyholder leaves |
| Responsible keyholder | Access procedure and spare-key policy | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits“
Contact states must survive the handover clearly
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
The 이중 위치 키 스위치 가이드 유지 선택에 대한 맥락을 제공합니다. 일시적 키 스위치 가이드 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Captive keys and normal access control
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
The HSE(영국 보건안전청)의 인간 공학(Human Factors) 소개는 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
정확한 잠금 시스템과 증거가 뒷받침하지 않는 한, 특정 키 유형이 무단 복제나 오용에 대해 안전하다고 주장하지 마십시오. 일반적인 산업용 키 조작기는 제어된 조작을 위해 흔히 선택되며, 그 목적은 정확하게 설명되어야 합니다.
Ordinary key switches and trapped-key systems
제어 키 스위치와 목적에 맞게 설계된 키 보관형 인터록 시스템은 서로 다른 제품 및 시스템 개념입니다. 일반 조작기의 키 보유 옵션이 평가된 인터록 장치와 동일한 시퀀스 제어, 격리 또는 안전 속성을 제공한다고 가정하지 마십시오.
기계에 안전 관련 접근 시퀀스가 필요한 경우, 해당 요구 사항을 책임 설계자에게 전달하십시오. 선택 시에는 전체 시스템과 적용 가능한 요구 사항을 고려해야 합니다. 일반적인 기사 하나로 사진 속 조작기를 검증된 안전 장치로 바꿀 수는 없습니다.
The 대한민국 유해 에너지 규정, 29 CFR 1910.147, 은 일반 제어를 에너지 격리로부터 분리하는 것에 대한 맥락을 제공합니다. 작동 키를 제거한다고 해서 반드시 모든 에너지원이 격리되는 것은 아닙니다. 고용주의 문서화된 에너지 제어 절차와 해당 설치에 적용되는 규칙을 사용하십시오.

Make the selected state visible to other workers
모드가 선택된 상태에서 키를 뽑는 경우, 키 소지자만이 상태를 이해해야 하는 유일한 사람은 아닙니다. 라벨, 위치 표시 및 모든 표시는 다음 작업자나 정비원에게 유의미한 상태로 유지되어야 합니다.
조명이 사용되는 경우, 그것이 선택, 제어기 수락 또는 공급 가용성 중 무엇을 전달하는지 정의하십시오. 점등된 키 스위치 안내서 은(는) 해당 디스플레이 문제를 다룹니다. 램프는 키 제거 권한을 설정할 수 없으며, 제거된 키는 램프의 의미를 설정할 수 없습니다.
실제 시야각과 작업을 검토하십시오. 스위치 바로 앞에서만 보이는 작은 표시는 측면에서 접근하는 작업자에게 부적절할 수 있습니다. 모든 모호함을 추가적인 색상 하나로 해결하려 하지 말고, 필요한 경우 메시지와 패널 배치를 개선하십시오.
Replacement parts can change the access procedure
두 조작기는 헤드 크기와 접점 배치를 공유하면서도 서로 다른 위치에서 키를 제거할 수 있도록 허용할 수 있습니다. 따라서 언뜻 편리해 보이는 교체 부품이 기계가 선택된 상태로 유지되는 방식이나 모드를 변경할 수 있는 사람을 바꿀 수 있습니다.
장치를 교체할 때는 제거 권한을 명시적으로 비교하십시오. 또한 회전 동작, 접점 상태, 잠금장치/키 호환성 및 패널 라벨을 비교하십시오. 기존 키를 허용하는 교체품이라도 제거 패턴이 다를 수 있으며, 새 키가 있는 교체품은 접근 관리 프로세스를 변경할 수 있습니다.
원하는 키 제거 위치를 얻기 위해 잠금 메커니즘을 줄질하거나, 개조하거나, 무력화하지 마십시오. 공급업체에 적절한 문서화 버전을 요청하고 장비의 승인된 디자인을 유지하십시오. 원래 사양을 알 수 없는 경우, 책임자가 의도된 동작을 확인할 때까지 해당 불확실성을 유지하십시오.
Acceptance and records
설치하기 전에 납품된 부품 식별 번호와 승인된 도면 및 제거 테이블을 비교하십시오. 적절한 격리 검사 절차에 따라 각 위치의 기계적 동작, 키 제거 허용 여부 및 접점 상태를 확인하십시오. 한 번의 성공적인 키 회전으로 수락을 단정하지 마십시오.
승인된 장비 절차에 따라 제어기 응답과 표시를 시운전하십시오. 키를 제거한 후에도 무엇이 선택되어 있는지, 그리고 필요한 경우 전원 차단 후 어떤 일이 발생하는지 확인하십시오. 부적합한 부품에 맞추기 위해 절차를 임의로 변경하지 말고 차이점을 기록하십시오.
정확한 옵션 코드, 승인된 테이블 및 키 관리 지침을 기계 기록과 함께 보관하십시오. 다음으로부터의 견적의 경우 온포우, 표시된 위치 도면을 포함하고 키를 해제해야 하는 위치와 유지해야 하는 위치를 지정하십시오. 견적을 최종 접근 사양으로 취급하기 전에 서면 확인을 요청하십시오.
Further learning: a contact is an input to a sequence
RealPars 강의는 배선도와 PLC 프로그램 간의 관계를 설명합니다. 이는 물리적 키 위치와 제어기 응답 간의 구분을 지원합니다. 특정 잠금장치의 키 제거 동작을 시연하거나 키 보관형 안전 시스템을 검증하는 것은 아닙니다.
자주 묻는 질문
2위치 키 스위치는 양쪽 위치 모두에서 키를 분리합니까?
반드시 그런 것은 아닙니다. 위치 수와 키 제거 가능 위치는 별개의 사양입니다. 제공된 잠금장치 및 조작부 버전에 해당하는 정확한 키 제거 위치 표를 요청하십시오.
스프링 복귀란 키를 정지 상태에서만 제거할 수 있음을 의미합니까?
Do not assume so. Return action describes mechanical movement after release; key removal describes the lock's withdrawal permissions. Confirm both independently.
키를 제거하면 접점이 열리나요?
그것은 정의된 조작자 동작과 접점 표에 따라 다릅니다. 유지된 위치는 제거 후에도 선택 상태를 유지할 수 있습니다. 허용된 철수 위치마다 결과 상태를 기록하십시오.
포획 키 조작자는 완전한 안전 인터록입니까?
An ordinary captive-key option does not establish a complete safety system. Safety-related access sequences require suitable equipment, documented design and the applicable assessment.
교체 시 어떤 점을 확인해야 합니까?
절단 위치, 조작자 동작, 접점 표, 키 호환성 및 패널 표시를 비교하십시오. 절단부와 일치하거나 익숙한 키를 수용하는 것만으로는 동일한 구성을 확립하기에 충분하지 않습니다.





