Blog

26-10-18

Industrial Key Switch Troubleshooting: Lock, Actuator or Contact Fault?

Industrial key switch troubleshooting begins by separating the key and lock mechanism, the rotary operator, the rear contact assembly and the machine's.
26-10-18

Industrial Push Button Sticking: Separate the Operator from the Circuit Fault

An industrial push button that sticks after installation needs a mechanical investigation as well as an electrical check. First establish whether the.
26-10-18

Replacing a Push Button Contact Block Without Changing the Operator

Push button contact block replacement starts with the identity of the complete assembly, not the diameter of the front button. Record the operator,.
26-10-17

Push Button Legend Plates: Clear Commands and Durable Marking

Specify push button legend plates with clear command wording, verified mounting, readable layouts, durable marking and controlled artwork.
26-10-17

RJ45 Panel-Mount Connectors: Network and Enclosure Checks

Specify RJ45 panel connectors with channel tests, shielding, PoE requirements, enclosure checks and a clear machine service-network purpose.
26-10-17

USB-C Panel-Mount Connectors: Data, Power and Qualification

Qualify USB-C panel connectors for required data, power, roles, plug orientations and cable paths without assuming capabilities from shape.
26-10-16

Panel-Mount USB Connectors for Machine Service Access

Select panel-mount USB service connectors by host and device roles, cable path, mounting, enclosure conditions and complete task testing.
26-10-16

AC-15 and DC-13: Reading Control Switch Load Ratings

Read AC-15 and DC-13 control-switch ratings with the actual coil load, operational voltage, current, suppression and switching duty.
26-10-16

Gold vs Silver Switch Contacts for Low-Level Signals

Compare gold and silver contact systems by actual signal level, switching duty, surface construction, environment and qualification evidence.
26-10-15

Switch Contact Resistance Measurement: Avoiding False Results

Measure switch contact resistance with defined test boundaries, suitable fixtures, four-wire methods and controlled low-level test conditions.
26-10-15

Push Button Incoming Inspection: A Receiving Checklist

Inspect incoming push buttons using order-code checks, panel fit, contact mapping, lamp tests, traceable samples and clear lot-release records.
26-10-14

Plug-In Relay Sockets: Compatibility, Retention and Replacement

Qualify a plug-in relay socket using approved pairings, terminal drawings, wiring limits, retention accessories and controlled maintenance procedures.

1 2 3...16 Další > >>Page 2 / 16