Blog
-
26-08-31Touch Switch vs Push Button: Choosing an Industrial InterfaceCompare a touch switch vs push button by feedback, gloves, contamination, cleaning, lifetime, control output, safety role, and usability. -
26-08-31Electromechanical Relay Selection for Industrial Control PanelsSelect an electromechanical relay by coil, contacts, load type, isolation, timing, socket, environment, protection, and maintainability. -
26-08-30Industrial Buzzer Selection: Sound, Environment, and Panel IntegrationChoose an industrial buzzer by voltage, sound pattern, audibility, duty cycle, panel mounting, environment, and alarm-system validation. -
26-08-30Tower Light Color Meaning: A Practical Guide for Machine StatusUnderstand common tower light color meanings and learn how to document red, amber, green, blue, and white signals without creating ambiguity. -
26-08-29Micro Switch vs Limit Switch: What Is the Practical Difference?Compare a micro switch vs limit switch by construction, enclosure, actuator, mounting, environment, and machine integration before choosing. -
26-08-29How Does a Micro Switch Work? Snap Action, Contacts, and SelectionLearn how a micro switch works, what snap action means, how COM, NO and NC contacts behave, and what engineers should verify before selection. -
26-08-27Which Switch Turns Off When Released? — A Guide to Momentary Push Button SwitchesWhen you press a button to start a machine, trigger a control function, or operate equipment, you may want the device to stop immediately once you release your hand. In this situation,... -
26-08-26What Is On and Off on a Toggle Switch?If you are buying or selecting a toggle switch, one of the first things you will want to know is simple: which position is ON, and which position is OFF?In most toggle... -
26-08-1830 Amp Push Buttons: Separate the Command Device from the Power PathA 30amp push button switch label is not a universal instruction to place a 30 A load directly through an operator. The number must be read with the selected product’s rating conditions... -
26-08-18Vandal-Resistant Push Buttons: Check the Mounting Stack and Rear AccessA vandal resistant push button is best specified as a mounted assembly, not as a stand-alone promise about security, sealing, or impact performance. Before a panel is released, confirm the selected operator’s... -
26-08-175/8 Inch Push Button Cutouts: Confirm the Actual Mounting InterfaceCheck a 5/8 inch push button switch against the drawing: nominal size, cutout, thread, panel thickness, clearance and operating function before ordering. -
26-08-17Green Push Buttons: Set a Clear Start Command in the PanelLearn how to specify a green push button with a clear start command, label, contact action, panel context and drawing-based product review before ordering.
-
31
26-08Touch Switch vs Push Button: Choosing an Industrial InterfaceCompare a touch switch vs push button by feedback, gloves, contamination, cleaning, lifetime, control output, safety role, and usability.
-
31
26-08Electromechanical Relay Selection for Industrial Control PanelsSelect an electromechanical relay by coil, contacts, load type, isolation, timing, socket, environment, protection, and maintainability.
-
30
26-08Industrial Buzzer Selection: Sound, Environment, and Panel IntegrationChoose an industrial buzzer by voltage, sound pattern, audibility, duty cycle, panel mounting, environment, and alarm-system validation.
-
30
26-08Tower Light Color Meaning: A Practical Guide for Machine StatusUnderstand common tower light color meanings and learn how to document red, amber, green, blue, and white signals without creating ambiguity.
-
29
26-08Micro Switch vs Limit Switch: What Is the Practical Difference?Compare a micro switch vs limit switch by construction, enclosure, actuator, mounting, environment, and machine integration before choosing.
-
29
26-08How Does a Micro Switch Work? Snap Action, Contacts, and SelectionLearn how a micro switch works, what snap action means, how COM, NO and NC contacts behave, and what engineers should verify before selection.
-
27
26-08Which Switch Turns Off When Released? — A Guide to Momentary Push Button SwitchesWhen you press a button to start a machine, trigger a control function, or operate equipment, you may want the device to stop immediately once you release your hand. In this situation,...
-
26
26-08What Is On and Off on a Toggle Switch?If you are buying or selecting a toggle switch, one of the first things you will want to know is simple: which position is ON, and which position is OFF?In most toggle...
-
18
26-0830 Amp Push Buttons: Separate the Command Device from the Power PathA 30amp push button switch label is not a universal instruction to place a 30 A load directly through an operator. The number must be read with the selected product’s rating conditions...
-
18
26-08Vandal-Resistant Push Buttons: Check the Mounting Stack and Rear AccessA vandal resistant push button is best specified as a mounted assembly, not as a stand-alone promise about security, sealing, or impact performance. Before a panel is released, confirm the selected operator’s...
-
17
26-085/8 Inch Push Button Cutouts: Confirm the Actual Mounting InterfaceCheck a 5/8 inch push button switch against the drawing: nominal size, cutout, thread, panel thickness, clearance and operating function before ordering.
-
17
26-08Green Push Buttons: Set a Clear Start Command in the PanelLearn how to specify a green push button with a clear start command, label, contact action, panel context and drawing-based product review before ordering.
- NO.25, SHANGPU 2ND ROAD, QILIGANG INDUSTRIAL PLANT, YUEQING, 325605, ZHEJIANG, CHINA
- +86-577-62628788
- sales@onpow.com
-
Products
-
Application
-
About us
-
Support
-
News
-
WhatsApp
WhatsApp
-
Skype
Skype
-
Wechat
Wechat
-
Email
Email