Blog
-
26-07-23How to Choose a Push Button Enclosure That Actually FitsSelect a push button enclosure from its hole pattern, usable internal depth, cable entries, and the exact device geometry?not from hole diameter alone. ContentsPart 1. Define the decision before comparing productsPart 2.... -
26-07-22How to Specify a Panel-Mounted Push Button SwitchChoose a panel-mounted push button by matching its actual cutout, panel thickness, rear clearance, terminals, control circuit, and intended operator action. ContentsPart 1. Define the decision before comparing productsPart 2. Lock the... -
26-07-21Selecting a 40mm Push Button Without Assuming the Panel CutoutSelect a 40mm push button switch by separating actuator diameter from panel cutout, then confirm the exact model, contacts, terminals, and rear clearance. ContentsPart 1. Define the decision before comparing productsPart 2.... -
26-07-2119mm Push Button Switch GuideWhen selecting a push button switch for an equipment control panel, in addition to choosing the appropriate contact configuration, wiring method, and protection rating based on electrical requirements, confirming the correct mounting... -
26-07-20A Cutout-First Guide to 30mm Push Button SwitchesA 30mm push button switch begins with a φ30 panel interface. Choose it when the finished panel hole is φ30 or when an approved panel redesign creates that interface. Then check the... -
26-07-20How to Specify a 25mm Push Button for Your PanelA 25mm push button switch is the right starting point when the panel drawing calls for a φ25 mounting hole. Select it from that physical interface outward: verify the finished cutout and... -
26-07-19Choosing Ring or Dot Illumination for Panel Push ButtonsRing illumination vs dot illumination is first an HMI choice, not a voltage choice. A ring places a halo around the actuator and works well when the operator should recognize the control... -
26-07-19How to Specify IP and IK Ratings for Industrial Push ButtonsLearn how IP and IK ratings differ, what IP65 and IP67 mean for industrial push buttons, and how to select protection for washdown, outdoor, and high-impact equipment. -
26-07-18How to Select a Heavy Duty Push Button Switch Without GuessworkA heavy duty push button switch is not a single standard grade name. Treat the phrase as a procurement filter: compare mechanical and electrical life cycles, IP and IK boundaries, front materials... -
26-07-18When Is a 19mm Push Button Switch the Right Panel Cutout?A 19mm push button switch is the right panel cutout when you need more finger reach and legend space than a typical 16mm layout, but you do not need the modular accessory... -
26-07-1720A Push Button Switches: When to Switch a Load Directly and When to Use a ContactorA 20A push button switch should not be selected for direct load switching from the “20A” label alone. The label must be tied to the exact model, the meaning of the published... -
26-07-17Dual Push Button Switches for 22mm Panels: Start/Stop Layout, Contacts, and IP OptionsA dual push button switch puts two command actions into one panel location; for a typical start/stop station, the contact functions, control circuit, and front-panel IP requirement must be specified before selecting...
-
23
26-07How to Choose a Push Button Enclosure That Actually FitsSelect a push button enclosure from its hole pattern, usable internal depth, cable entries, and the exact device geometry?not from hole diameter alone. ContentsPart 1. Define the decision before comparing productsPart 2....
-
22
26-07How to Specify a Panel-Mounted Push Button SwitchChoose a panel-mounted push button by matching its actual cutout, panel thickness, rear clearance, terminals, control circuit, and intended operator action. ContentsPart 1. Define the decision before comparing productsPart 2. Lock the...
-
21
26-07Selecting a 40mm Push Button Without Assuming the Panel CutoutSelect a 40mm push button switch by separating actuator diameter from panel cutout, then confirm the exact model, contacts, terminals, and rear clearance. ContentsPart 1. Define the decision before comparing productsPart 2....
-
21
26-0719mm Push Button Switch GuideWhen selecting a push button switch for an equipment control panel, in addition to choosing the appropriate contact configuration, wiring method, and protection rating based on electrical requirements, confirming the correct mounting...
-
20
26-07A Cutout-First Guide to 30mm Push Button SwitchesA 30mm push button switch begins with a φ30 panel interface. Choose it when the finished panel hole is φ30 or when an approved panel redesign creates that interface. Then check the...
-
20
26-07How to Specify a 25mm Push Button for Your PanelA 25mm push button switch is the right starting point when the panel drawing calls for a φ25 mounting hole. Select it from that physical interface outward: verify the finished cutout and...
-
19
26-07Choosing Ring or Dot Illumination for Panel Push ButtonsRing illumination vs dot illumination is first an HMI choice, not a voltage choice. A ring places a halo around the actuator and works well when the operator should recognize the control...
-
19
26-07How to Specify IP and IK Ratings for Industrial Push ButtonsLearn how IP and IK ratings differ, what IP65 and IP67 mean for industrial push buttons, and how to select protection for washdown, outdoor, and high-impact equipment.
-
18
26-07How to Select a Heavy Duty Push Button Switch Without GuessworkA heavy duty push button switch is not a single standard grade name. Treat the phrase as a procurement filter: compare mechanical and electrical life cycles, IP and IK boundaries, front materials...
-
18
26-07When Is a 19mm Push Button Switch the Right Panel Cutout?A 19mm push button switch is the right panel cutout when you need more finger reach and legend space than a typical 16mm layout, but you do not need the modular accessory...
-
17
26-0720A Push Button Switches: When to Switch a Load Directly and When to Use a ContactorA 20A push button switch should not be selected for direct load switching from the “20A” label alone. The label must be tied to the exact model, the meaning of the published...
-
17
26-07Dual Push Button Switches for 22mm Panels: Start/Stop Layout, Contacts, and IP OptionsA dual push button switch puts two command actions into one panel location; for a typical start/stop station, the contact functions, control circuit, and front-panel IP requirement must be specified before selecting...
- NO.25, SHANGPU 2ND ROAD, QILIGANG INDUSTRIAL PLANT, YUEQING, 325605, ZHEJIANG, CHINA
- +86-577-62628788
- sales@onpow.com
-
Products
-
Application
-
About us
-
Support
-
News
-
WhatsApp
WhatsApp
-
Skype
Skype
-
Wechat
Wechat
-
Email
Email