Nouvelles

local

26-09-16

12V DC Toggle Switch Selection: Load, Contacts and LED Voltage

A 12V DC toggle switch must be chosen for the actual DC load, including steady current, startup or inrush current, inductive energy, switching.
26-09-16

Heavy-Duty Toggle Switch Selection for Industrial Panels

A heavy-duty panel toggle switch is selected by documented mechanical and electrical duty, not by lever size or marketing language. Review load.
26-09-15

2-Pin, 3-Pin, 4-Pin and 6-Pin Toggle Switches Compared

Pin count does not uniquely identify a toggle switch circuit. Two pins often indicate SPST, three often indicate SPDT, four may indicate DPST or.
26-09-15

Toggle Switch Guards and Covers: Preventing Accidental Operation

A toggle switch guard or cover reduces unintended operation, impact and contamination, but different designs solve different problems. A flip.
26-09-15

Waterproof Toggle Switches: Sealing the Panel Cutout Correctly

A waterproof toggle switch protects the installation only when the switch body, front seal, panel surface, mounting hardware, rear terminals and.
26-09-14

Lighted Toggle Switch Wiring: Separate Lamp and Contact Circuits

A lighted toggle switch combines switching contacts with a lamp or LED, but the indicator may be internally connected, share a terminal, or use.
26-09-14

Momentary Toggle Switches: Spring Return Actions and Applications

A momentary toggle switch returns from one or more lever positions when released. It is useful for jog, raise/lower, test or command pulses.
26-09-14

Three-Position Toggle Switches: ON-OFF-ON vs ON-ON-ON

A three-position toggle switch must be specified by its contact sequence, not only by the number of lever positions. ON-OFF-ON disconnects the.
26-09-13

SPST Toggle Switch Selection for Simple On-Off Control

A single-pole single-throw toggle switch opens or closes one circuit. It is the simplest maintained ON-OFF contact arrangement, but safe.
26-09-13

Câblage d'un interrupteur à bascule SPDT pour les circuits de commande industriels

Un interrupteur à bascule SPDT possède une borne commune qui se connecte à l'une des deux bornes de direction. Il peut commuter entre deux signaux ou créer un contact MARCHE-MARCHE.
26-09-13

Câblage d'un interrupteur à bascule DPDT : Logique des contacts à six bornes expliquée

Un interrupteur à bascule bipolaire bidirectionnel (DPDT) contient deux pôles inverseurs électriquement séparés actionnés par un seul levier. Six bornes sont communes.
26-09-10

Conception de panneau de commutateurs à bouton-poussoir : disposition, câblage et vérification

Planifier un panneau de commande à bouton-poussoir par fonction, disposition des opérateurs, logique de contact, boîtier, câblage, étiquettes, environnement et vérifications de mise en service.

1 2...22 Suivant > >>Page 1 / 22