Blog

gek

26-08-30

Industrial Buzzer Selection: Sound, Environment, and Panel Integration

Choose an industrial buzzer by voltage, sound pattern, audibility, duty cycle, panel mounting, environment, and alarm-system validation.
26-08-30

Tower Light Color Meaning: A Practical Guide for Machine Status

Understand common tower light color meanings and learn how to document red, amber, green, blue, and white signals without creating ambiguity.
26-08-29

Micro Switch vs Limit Switch: What Is the Practical Difference?

Compare a micro switch vs limit switch by construction, enclosure, actuator, mounting, environment, and machine integration before choosing.
26-08-29

Hoe werkt een microschakelaar? Snapschakeling, contacten en selectie

Leer hoe een microschakelaar werkt, wat klikwerking betekent, hoe COM-, NO- en NC-contacten zich gedragen en wat ingenieurs moeten controleren voor selectie.
26-08-27

Which Switch Turns Off When Released? — A Guide to Momentary Push Button Switches

When you press a button to start a machine, trigger a control function, or operate equipment, you may want the device to stop immediately once you release your hand. In this situation,...
26-08-26

What Is On and Off on a Toggle Switch?

If you are buying or selecting a toggle switch, one of the first things you will want to know is simple: which position is ON, and which position is OFF?In most toggle...
26-08-18

30 Amp Push Buttons: Separate the Command Device from the Power Path

A 30amp push button switch label is not a universal instruction to place a 30 A load directly through an operator. The number must be read with the selected product’s rating conditions...
26-08-18

Vandal-Resistant Push Buttons: Check the Mounting Stack and Rear Access

A vandal resistant push button is best specified as a mounted assembly, not as a stand-alone promise about security, sealing, or impact performance. Before a panel is released, confirm the selected operator’s...
26-08-17

5/8 Inch Push Button Cutouts: Confirm the Actual Mounting Interface

Check a 5/8 inch push button switch against the drawing: nominal size, cutout, thread, panel thickness, clearance and operating function before ordering.
26-08-17

Green Push Buttons: Set a Clear Start Command in the Panel

Learn how to specify a green push button with a clear start command, label, contact action, panel context and drawing-based product review before ordering.
26-08-15

IK Ratings Explained: A Guide to Electromechanical Switches

When selecting electromechanical switches for industrial equipment, control panels, or outdoor machinery, buyers usually check the electrical specifications first. However, electrical performance is only one part of the equation.Even if a switch...
26-08-15

Double Pole Push Buttons: Keep Two Control Circuits Documented

A double pole push button switch should be specified as two separately documented control-circuit actions operated by one mechanical press. Before choosing hardware, define the function and contact state for each pole,...

1 2 3...7 Volgende > >>Page 2 / 7