Blog

26-08-12

How to Specify a Triple Pole Push Button Switch in a Control Panel

For a triple-pole push button switch, three separate contact paths sit under one operator, but that arrangement is not automatically a three-phase power switch. Start with the schematic: define each pole’s NO/NC...
26-08-11

Push Button Switch Box vs Panel-Mount Operators: Which Architecture Fits Your Equipment?

Compare a push button switch box with panel-mount operators using cutouts, wiring space, control logic and model-specific ONPOW evidence for global OEM buyers.
26-08-11

Push Button Switch for Boat Panels: A Corrosion, Sealing and Service RFQ Guide

Prepare a boat-panel push button RFQ covering salt exposure, sealing evidence, cutout, terminals and service access.
26-08-06

Which Is Safer, NO or NC?

When choosing a push button switch, limit switch, sensor, or safety control device, many buyers ask the same question: Which is safer, a normally open switch or a normally closed switch? The...
26-08-05

110V vs 220V Push Button LED Circuits: Specify the Lamp Supply

A 110V push button switch with illumination must be specified from the AC lamp supply first, not from the contact rating on the datasheet. The visible 110V or 220V LED option identifies...
26-08-05

When Is an 8mm Push Button Switch the Right Micro Cutout?

An 8mm push button switch is the right micro cutout when the panel drawing already commits to Φ8 and switch density matters more than finger target or legend area. Lock cutout diameter,...
26-08-01

Choosing a Push Button for Lighting Control Systems

A lighting-control push button must match the control method and compatible relay or controller; do not assume that a panel button directly switches a lighting ContentsPart 1. Define the decision before comparing...
26-07-31

How to Choose a Push Button Switch for Machinery

Choose a machinery push button from the approved machine function, panel interface, contact logic, environmental boundary, documentation, and exact model data. ContentsPart 1. Define the decision before comparing productsPart 2. Lock the...
26-07-30

Selecting Push Buttons for Electric Vehicle Control Panels

For an electric vehicle panel, define the command, low-voltage control circuit, interface geometry, environmental exposure, indication needs, and validation rou ContentsPart 1. Define the decision before comparing productsPart 2. Lock the physical...
26-07-30

What Is the Difference Between an Emergency Stop E-Stop and an Emergency Switch Off?

In industrial equipment and automation systems, safety devices are essential to protect operators, machines, and production processes. However, many buyers are often confused about the difference between an emergency stop E-stop and...
26-07-29

Indicator Light or Illuminated Push Button: Make the Split

Choose an indicator light for status display only and an illuminated push button when the same panel position must accept an operator command and show a defined ContentsPart 1. Define the decision...
26-07-29

30mm Push Button Switches | Heavy-Duty Industrial Control Buttons | ONPOW

When selecting push button switches for complex industrial equipment and large control systems, it is essential to consider not only electrical requirements but also operational reliability, durability, and user experience. The 30mm...

1 2 3...6 Next > >>Page 2 / 6